Degree of polymerization

The degree of polymerization, or DP, is usually defined as the number of monomeric units in a macromolecule or polymer or oligomer molecule.^[1][2][3]
For a homopolymer, there is only one type of monomeric unit and the number-average degree of polymerization is given by

For most industrial purposes, degrees of polymerization in the thousands or tens of thousands are desired.
Some authors, however, define DP as the number of repeat units, where for copolymers the repeat unit may not be identical to the monomeric unit.^[4][5] For example, in nylon-6,6, the repeat unit contains the two monomeric units —NH(CH₂)₆NH— and —OC(CH₂)₄CO—, so that a chain of 1000 monomeric units corresponds to 500 repeat units. The degree of polymerization or chain length is then 1000 by the first (IUPAC) definition, but 500 by the second.
In polycondensation, in order to achieve a high degree of polymerization (and hence molecular weight), X_n, a high fractional monomer conversion, p, is required, as per Carothers' equation: X_n = 1/(1−p). A monomer conversion of p = 99% would be required to achieve X_n = 100.

Correlation with physical properties

Relationship between degree of polymerization and melting temperature for polyethylene. Data from Flory (1963).

Polymers with identical composition but different total molecular weights may exhibit different physical properties. In general, increasing degree of polymerization correlates with higher melting temperature ^[6] and higher mechanical strength.